CHEVY  388  5.700 STROKER  KIT

Triton Engineering's Chevy 388 Stroker will increase your 350/5.7L to 388 cubic inches at .030. This kit is for use with 1968-85 350 Blocks with 2 piece rear main and Stock valve Configuration heads. "Externally Balanced" You must use a 400 External Damper and Flex Plate / Flywheel Combination.  Kit Includes:  -Scat "9000" Nodular 3.750 Stroke, Lightweight, Knife-Edged Crank.  -Triton Engineering 4130  Forged I-Beam 5.700 Rods, with 3/8" ARP wav-loc bolts. Press Fit  -Speed Pro Flat Top Hypereutectic Coated Skirt Pistons.  ( Optional Kit Components are Listed Below ) - (33880) - 

$715.00

Optional Kit Components
$   35 - SCAT "9000" Knife-Edged Lightweight Crank
$ 375 - Triton Engineering 4340 Forged (Int.Bal) Steel Crank
$   40 - Bushed 4130 5.700 Rods
$   80 - Bushed 4340 5.700 Cap Screw Rods
$ 180 - Triton Engineering 4340 5.700 H-Beam Rods
$   25 - Dynagear Hi-Volume Oil Pump
$   48 - Dynagear True Roller Timing Set
$   50 - Hastings Plasma Moly Rings
$ 110 - Hastings "Power-Flex" Plasma Moly Rings - File Fit
$   45 - Crank Adapter for 1986-Up Block
$   54 - Professional Products HP 6 3/4" 400 Damper (Looks like 350)
$ 140 - Professional Products SFI 6 3/4" 400 Damper (Looks like 350)
$   62 - Professional Products HP 8" 400 Damper
$  150 - Professional Products SFI 8" 400 Damper
$ 105 - Triton Engineering Dual-Idler Gear Drive Set
$   55 - Detroit Gaskets "COLDSEAL" Racing Gasket Set
$   48 - Clevite 77 "P" Series Rod and Main Bearings
$ 115 - Clevite 77 "H" Series Racing Rod and Main Bearings
$   60 - Triton Engineering SFI Approved Flex Plate
$   18 - Balance Plate, Use a 350 Flex Plate
$ 175+ - Balance Complete Assembly

PME DISTRIBUTING   (800) 583-8789