CHEVY  489  6.385 STROKER  KIT

Triton Engineering's Big Block Chevy 489 Stroker Kit will increase your 454 to 489 cubic inches at .030. This kit is for use with 1970-90 454 Blocks with 2 piece rear main and Stock valve Configuration heads. "Externally Balanced" You must use a 454 External Damper and Flex Plate / Flywheel Combination.  Kit Includes:  - Triton Engineering 4130 Forged Steel 4.250 Stroke Crank.  - Triton Engineering 4340  Forged I-Beam 6.385 Long Rods, with 7/16" ARP 8740 Cap Screws and Doweled Cap and Press Fit Pin.  - Keith Black (KB) Flat Top Hypereutectic Pistons.  ( Optional Kit Components are Listed Below ) - (34891) - Retail is $ 1495.00

$1099.00

Optional Kit Components
$   48 - Crank Adapter for 1986-Up Block
$ 150 - Triton Engineering 4340 Forged Steel Crank
$   40 - Bushed 4340 6.385 Rods
$ 250 - Triton Engineering 4340 6.385 H-Beam Rods
$ 160 - JE/SRP Flat Top / Sm. Dome Forged Lightweight Pistons
$ 210 - JE/SRP Big Dome Forged Lightweight Pistons
$   28 - Dynagear Hi-Volume Oil Pump
$   58 - Dynagear True Roller Timing Set
$ 105 - Hastings Plasma Moly Rings
$ 125 - Hastings "Power-Flex" Plasma Moly Rings - File Fit
$   75 - Professional Products HP 8" 454 Damper
$  167 - Professional Products SFI 8" 454 Damper
$ 115 - Triton Engineering Dual-Idler Gear Drive Set
$   73 - Clevite 77 "P" Series Rod and Main Bearings
$ 142 - Clevite 77 "H" Series Racing Rod and Main Bearings
$   18 - Balance Plate, Use a 350 Flex Plate
$   60 - Triton Engineering SFI Approved Flex Plate
$ 220+ - Balance Complete Assembly

PME DISTRIBUTING   (800) 583-8789